A Brief History

The Marine Division of Achilles USA, Inc. is unique in that we sell the only truly "branded" product of our company, Achilles Inflatable Boats. The boats that we manufacture in Japan, and to a lesser degree in the very recent past, in China, are the only finished products that actually are sold as an Achilles brand. For this reason, it is a very important part of the companies' history, and it offers a great sense of pride to our parent company in Japan as well.

Achilles Inflatables are manufactured using Hypalon fabric that is made by the Achilles Corporation in Japan. Hypalon is a synthetic rubber compound manufactured by DuPont that is used in the outer coating of our material. Because of the physical characteristics of Hypalon, it can not be heat welded. All of our boats need to be glued by hand. The reason we continue to use Hypalon despite its cost (both as a fabric and because of the increased labor costs for producing a hand made product) is because it has historically proven to be perhaps the best material for the manufacture of inflatable boats. The reasons the fabric performs so well include, but are not limited to: UV resistance, abrasion resistance, and resistance to oil and gas - all things that boats are subject to in the marine environment. Hypalon fabric is manufactured by a calendaring process, and our final product consists of four layers. There are two inside layers of neoprene for air retention, a supporting layer of core fabric (either Nylon or Polyester), and an outside coating of Hypalon. It is a multi-step process, and the end result is a very strong supported fabric.

Many of our competitors use PVC based fabric for manufacturing their boats because of the cost savings involved in materials and manufacturing. There are many boats on the market similar to ours available at half the cost. Although this makes our efforts to sell against our low cost competitors challenging, it is actually a good sales and marketing tool for us to state that despite the fact that Achilles is a world leader in the manufacture of PVC, we still make our boats out of Hypalon because we believe it is a better fabric.

Achilles has always had the reputation for manufacturing one of the highest quality inflatable boats in the world, and currently our niche in the market is being the best value in a foldable Hypalon inflatable. We will continue to work with our parent corporation in Japan to adapt quickly to market changes to enable us to become even more successful and competitive in all aspects of the inflatable industry in the U.S. in the years to come.

---

Chronology

1947 »	The Achilles Corporation was established in Japan. The rubberized factory division manufactured material primarily for rainwear
1961 »	The Achilles Corporation was manufacturing boats made from Butyl Rubber for the European Market
1973 »	Achilles USA, Inc. was established as a PVC manufacturing plant in Everett, Washington. Inflatable Boats made from Neoprene were displayed at the opening ceremony marking the introduction of Achilles Inflatables to the US market.
1977 »	Achilles Corporation in Japan began producing Hypalon Boats in Japan.
1981 »	A factory solely dedicated to the manufacturing of Hypalon Inflatable Boats was established.
1984 »	This year represented the pinnacle of inflatable boat sales in the U.S. Achilles sold over 10,000 inflatable boats into the U.S. market this year.
1985 »	Achilles manufactured their first RIB's. The HB100 and HB124
1996 »	Achilles received CE certification from ECM Nederland
1998 »	Achilles introduced the LSI series with a Hypalon Drop Stitch Floor
2002 »	Achilles introduced the LSR series with Roll-up Aluminum floors
2005 »	Achilles received NMMA Certification for its inflatables
Present »	Achilles continues to be a world leader in the inflatable industry constantly improving existing models and introducing new models to the market.

 

Technical Info - FAQ's

---

Problem:  Do I need to register my boat?

Solution:  You need to check the local or state requirements where you will be using your boat, but in most states you must register an inflatable especially if you use an outboard motor on the boat.

---

Problem:  What is the best way to clean my inflatable?

Solution:  There are many cleaners available designed specifically for inflatables. Our best advise is for you to ask the people you bought your boat from what they recommend. Cleaning should be done as frequently as necessary, especially on white boats. Once your boat is clean, we recommend using a protectant on the boat. Again, there are many protectants designed specifically for inflatable boats. Avoid using any products that contain silicone because silicone can be absorbed into the fabric over time, and it can make gluing difficult or impossible if you ever have to repair your boat or attach any accesories.

---

Problem:  How do I stop marine growth from forming on the bottom of the boat?

Solution:  The best way to prevent growth is by applying an anti-fouling paint formulated specifically for inflatable boats. There are several brands available and you should be able to find one at either the location you purchased your inflatable, or at a marine store that carries bottom paint. Be sure to follow the manufacturers' directions for proper adhesion and performance.

---

Problem:  My boat floor flexes when getting up on plane.

Solution:  Check the air chambers to make sure the boat has proper pressure. If your boat has an inflatable keel, check that as well. The pressure in the main tubes and the keel should be 2.8 PSI. If you have a high pressure drop stitch inflatable floor, it is important that the floor is also properly inflated. The proper pressure for the floor is 8.7 PSI. When a boat is under pressure, the floors will flex or the bottom of the boat will have more drag causing the boat not to perform properly. The best way to check the pressure is by purchasing an air pressure gauge that gives an exact pressure reading.

---

Problem:  I am getting a lot of water coming over the transom while running the boat.

Solution:  First we need to determine where the water is coming from. It may be that the motor is sitting too low on the transom and splash is off of the lower unit. The proper way to adjust the engine height is to run a straight line along the keel line of the boat and make sure that the fin of the engine above the prop is even with the bottom of the boat. You may need to adjust up and down up to 3/16" for best results.

---

Problem:  My boat seems to be losing air. How do I determine where my boat may be leaking air from?

Solution:  The first step is to visually inspect the boat for any signs of abrasion or small holes. If the boat seems to appear OK, then there are other areas to check. Make a soapy solution in a spray bottle and first spray around the valve and valve bases. If there is a problem with the valve, the solution will bubble. The o-ring or the flapper, or in an older boat even the valve itself may need to be replaced. Other areas to check for leaks would be the seam areas. Spray all the seams and along the rub strake and also around the end cones. Any air leaks will cause small air bubbles to form from the soapy water solution. If you do find air leakage, the location will determine the best way to resolve the issue. A simple repair can be done by yourself, but if the problem is more severe please refer the repair to a professional for best results.

---

Problem:  I need to get parts for my 20 year old Achilles boat. How do I know what model I have?

Solution:  If your boat has a transom, look for the metal ID plate. Located on this plate is your model number and the identification number. We need the model number and the last 2 digits of your serial number which is your model year. If this info is not available or undecipherable, we need as accurate a description of your boat as possible. The information we need are the color, length, what type of seating the boat has, etc. Then we should be able to help you determine what model you have. The good news is that most of the parts available today are interchangeable with the parts that were used on your 20 year old Achilles.

---

Problem:  What type of glue do use to repair my Achilles?

Solution:  All Achilles boats are made of Hypalon fabric. Small repairs can be made with a one part Hypalon glue, however for any larger repair, or for the attachment of any accessories, we recommend the use of a 2-part Hypalon adhesive. These are available from most inflatable dealers, or from most major marine retailers as well. You must also be sure to use Hypalon fabric when repairing your Achilles.